What To Do When A Garage Door Won’t Open Or Close With Remote

Garage door openers were designed to bring convenience to all people who use them. The remote control that goes along with the opener system sends a signal to the opener when a person pushes the open/close button, and the opener then gets the signal from the transmitter thanks to a built-in radio receiver. The motor then begins to run and the garage door either opens or closes. Clearly, this technology beats having to physically strain oneself to do the job the old-fashioned way.

In places like Highlands Ranch, CO, people love being able to open their garage door and get inside quickly, especially in the middle of winter, thanks to the convenience of their remote control. In some parts of the country, it can get cold. It can also rain excessively. Some days, on the other hand, are just so hot that the thought of having to bend down to physically lift open your garage door might make you want to pass out. So, what are you supposed to do when suddenly, the garage door will not open or close with the remote control? What are you supposed to do when you lose the convenience that the opener system was meant to provide? The team at HR Garage Door Repair has offered some advice, and it would be useful to anyone, anywhere, who owns a garage door that opens and closes by means of a garage door remote control.

Here is what to do when a garage door doesn’t respond to its remote control:

1. Check the batteries. If the transmitter batteries are dead, then the garage door will not be able to receive a signal from the transmitter, so it will not know to open or close. This is a very basic fix, but often times, people fail to check to see if the problem is simply a dead battery.
2. If the remote control seems to work when you are inside of the garage, but it won’t work when you are outside of the garage, then check the condition of the antenna wire which is on the garage door opener. If the antenna is fully in-tact, then you know it isn’t the problem, but if it is hanging down or otherwise not in the position that it should be in, adjust it. This just might solve the problem.
3. Make sure that there isn’t any interference from other wireless devices that might be being used in your general location. You can make the antenna longer by finding the antenna mount point. An extender just might be the solution if this is the issue causing the garage door to fail to respond to the remote control.
4. If you are having difficulty opening the garage door from the outside of the garage, and the problem isn’t the antenna wire as previously mentioned, then consider a universal garage door opener receiver and how it might help you. A universal garage door opener receiver is beneficial because it is able to make the range of your remote even better. With a system like this, you should be able to open and close your garage door from as far as 100 yards away.

If your garage door doesn’t open or close when you use your remote control, and none of these fixes solve the problem, then think about how it might help you to get in touch with a garage door repair and installation professional. No matter where you are, whether that is Highlands Ranch, Colorado or elsewhere in the country, you are sure to be able to find a local business that can provide the assistance that you need. Request a free price quote to get an idea of what you will be spending – this is something that most reputable technicians will be able to offer.

The garage door opener system and its remote control make your life easier. But if they are beginning to cause problems, try the basic steps mentioned to troubleshoot the issue. If all else fails, get in touch with an expert. You will likely be impressed with the rates that they offer, especially if you end up calling a local company.

Interested in a new opener?

Don’t forget to make sure you are aware of the various types of opener systems which are available, while we are discussing garage door openers. You might opt for a belt drive opener system because of its fairly low noise level. The belt that helps this system to operate gets rid of noises and vibrations that come along with other types of openers. A professional can answer any questions about this type of system, but you should know that the belt is generally made using rubber, polyurethane or fiberglass.

Chain drive opener systems, on the other hand, are one of the older ones that exist. They run the door along a track and use a chain, similar to what you would see in a bicycle, to push the trolley. The noise tends to be a bit louder from this type of system, which some people don’t like, but others actually appreciate because they want to know when the garage door is being opened and closed. They like to be warned when someone is about to come in or out of their garage. This could be beneficial for someone with teenagers, as they could be made aware if someone is trying to sneak out through the garage.

Screw drive opener systems take advantage of a trolley that rides on a rod, and it rotates to move the door so it opens or closes smoothly. There are less parts to maintain so if you are looking for something that is low maintenance, you might opt for a screw drive opener system for your home.

Hopefully the information offered by HR Garage Door Repair has been helpful for you. Best of luck in troubleshooting your garage door issues!

Aricle source here: What To Do When A Garage Door Won’t Open Or Close With Remote