What To Do When A Garage Door Won’t Open Or Close With Remote

Garage door openers were designed to bring convenience to all people who use them. The remote control that goes along with the opener system sends a signal to the opener when a person pushes the open/close button, and the opener then gets the signal from the transmitter thanks to a built-in radio receiver. The motor then begins to run and the garage door either opens or closes. Clearly, this technology beats having to physically strain oneself to do the job the old-fashioned way.

In places like Highlands Ranch, CO, people love being able to open their garage door and get inside quickly, especially in the middle of winter, thanks to the convenience of their remote control. In some parts of the country, it can get cold. It can also rain excessively. Some days, on the other hand, are just so hot that the thought of having to bend down to physically lift open your garage door might make you want to pass out. So, what are you supposed to do when suddenly, the garage door will not open or close with the remote control? What are you supposed to do when you lose the convenience that the opener system was meant to provide? The team at HR Garage Door Repair has offered some advice, and it would be useful to anyone, anywhere, who owns a garage door that opens and closes by means of a garage door remote control.

Here is what to do when a garage door doesn’t respond to its remote control:

1. Check the batteries. If the transmitter batteries are dead, then the garage door will not be able to receive a signal from the transmitter, so it will not know to open or close. This is a very basic fix, but often times, people fail to check to see if the problem is simply a dead battery.
2. If the remote control seems to work when you are inside of the garage, but it won’t work when you are outside of the garage, then check the condition of the antenna wire which is on the garage door opener. If the antenna is fully in-tact, then you know it isn’t the problem, but if it is hanging down or otherwise not in the position that it should be in, adjust it. This just might solve the problem.
3. Make sure that there isn’t any interference from other wireless devices that might be being used in your general location. You can make the antenna longer by finding the antenna mount point. An extender just might be the solution if this is the issue causing the garage door to fail to respond to the remote control.
4. If you are having difficulty opening the garage door from the outside of the garage, and the problem isn’t the antenna wire as previously mentioned, then consider a universal garage door opener receiver and how it might help you. A universal garage door opener receiver is beneficial because it is able to make the range of your remote even better. With a system like this, you should be able to open and close your garage door from as far as 100 yards away.

If your garage door doesn’t open or close when you use your remote control, and none of these fixes solve the problem, then think about how it might help you to get in touch with a garage door repair and installation professional. No matter where you are, whether that is Highlands Ranch, Colorado or elsewhere in the country, you are sure to be able to find a local business that can provide the assistance that you need. Request a free price quote to get an idea of what you will be spending – this is something that most reputable technicians will be able to offer.

The garage door opener system and its remote control make your life easier. But if they are beginning to cause problems, try the basic steps mentioned to troubleshoot the issue. If all else fails, get in touch with an expert. You will likely be impressed with the rates that they offer, especially if you end up calling a local company.

Interested in a new opener?

Don’t forget to make sure you are aware of the various types of opener systems which are available, while we are discussing garage door openers. You might opt for a belt drive opener system because of its fairly low noise level. The belt that helps this system to operate gets rid of noises and vibrations that come along with other types of openers. A professional can answer any questions about this type of system, but you should know that the belt is generally made using rubber, polyurethane or fiberglass.

Chain drive opener systems, on the other hand, are one of the older ones that exist. They run the door along a track and use a chain, similar to what you would see in a bicycle, to push the trolley. The noise tends to be a bit louder from this type of system, which some people don’t like, but others actually appreciate because they want to know when the garage door is being opened and closed. They like to be warned when someone is about to come in or out of their garage. This could be beneficial for someone with teenagers, as they could be made aware if someone is trying to sneak out through the garage.

Screw drive opener systems take advantage of a trolley that rides on a rod, and it rotates to move the door so it opens or closes smoothly. There are less parts to maintain so if you are looking for something that is low maintenance, you might opt for a screw drive opener system for your home.

Hopefully the information offered by HR Garage Door Repair has been helpful for you. Best of luck in troubleshooting your garage door issues!

Aricle source here: What To Do When A Garage Door Won’t Open Or Close With Remote

Learn More Us! Watch Our Video!

Video Source

When your garage door will no longer open, there is likely an issue involving your garage door opener. The garage door opener is what enables the doors to function. Turn to Highland Ranch Garage Door Repair and we’ll have help by your side in a hurry. We know how upsetting such a situation can be and this is why we make sure that help is available to you around the clock. Our service technicians have the ability to assist with your garage door servicing needs regardless of the type of door you may have.

We work with wood, steel, fiberglass and aluminum doors most often. Let us be your first point of contact so that you can get back into your garage and move on with the rest of your day. When you call on Highland Ranch Garage Door Repair, you can be sure that we will always have all we need when we arrive to your home, to handle the job.

Routine maintenance is a good way to avoid the problems that many people experience with their garage door. With routine maintenance of your door our technician will lubricate the parts of your door that require it, evaluate your garage door springs and check the parts of your opener to ensure they are operating properly. All of this can help you avoid the misfortune of having your garage door malfunction.

Keep on using your garage as usual by allowing Highland Ranch Garage Door Repair to handle the maintenance of your garage door. We offer our services to you at a reasonable rate because we do not wish to hear about anything happening to you, which could have been avoided with a little forethought. Call Highland Ranch Garage Door Repair today and let us discuss our maintenance program with you in further detail (720) 310-1801.

Aricle source here: Learn More Us! Watch Our Video!

What to Do Before Contacting a Garage Door Repair Service

Unless you have a lot of disposable income, this article may not appeal to you. However, if you do not and you’re always interested in finding out how you might save a buck or two, perhaps you’ll keep reading. If you need help from a garage door service in Highlands Ranch, CO, such as, HR Garage Repair, try troubleshooting before contacting them. If you are the type of person who loves convenience, it is unlikely that you are going to allow yourself to be inconvenienced for too long. With a little patience and some forethought, you may be able to resolve the problem on your own without ever having to call a professional garage door service.

While we don’t usually recommend that you handle repairs on your own simply because of the moving parts associated with your garage door, there are some things that we feel pretty confident that can be done without any threat of harm. Take it all in stride. We are not suggesting that you make your garage door repairs a DIY project, we are merely suggesting some things you might want to try out yourself before resorting to contacting a service provider and spending money unnecessarily.

Locate the Problem

Even when it comes to troubleshooting your problem, you may need to use certain precautions. However, when it comes to your automatic garage door, there are just a host of things that can go wrong. The problem could result from your springs, tracks, rollers or a variety of other components associated with your garage door and the garage door opener. Prior to finding a resolution for your problem, you need to know what the problem is.

Here is a simple troubleshooting technique. Lower your garage door and keep an eye on it as it is lowering.

The Door Shakes: If it shakes, you might have a problem with the rollers.

Noises: Is it making any type of strange noises? This can be due to a number of different problems. You need to make sure you know exactly where the noise is coming from before a solution can be applied.

Will Not Close or Open Completely: If you are noticing that your door will not go all the way to the ground or it doesn’t open up all the way, this indicates a problem with your garage door opener. Unfortunately, when the problems involves the automatic opener, this is a problem that needs to be addressed by a service professional.

Solutions to Common Problems

You can usually find the solution to common problems in the owner’s manual. In fact the owner’s manual will usually let you know when the services of a professional service provider are necessary.

Metal track problems: if you have noticed bumps and dents in the tracks of your garage door, you can resolve the problem by placing a wooden block on the area that is damaged. Tap the wood block with a hammer to straighten out the dents. Don’t apply too much pressure when hitting the block; you don’t want to cause additional damages to the track.

Misaligned Tracks: If you have discovered that your tracks are misaligned, this will require you to loosen the screws that connect the part of the track that appears to be out of alignment and simply tap the door back into the grooves. You can use a leveler to make sure it is straight before you begin using the door again. Continued use of your garage will only make the problem worse.

Direct Damage to the Door: This is often caused by someone running into the door or damages caused to your door due to rough weather, such as, hail damage. When you have run into your door several times, it is impossible for it still be in good condition. You will have undoubtedly caused some type of damage. In fact, your running into the garage door could be the reason it is out of track or has dents in it. In this case, you will not be able to hammer the dents out. The entire door may need to be replaced at this point.

It depends on the type of door that you have as to whether or not the damage is noticeable or not. If the door is on track and you still have problems with it, it is time to call in the experts of a garage door repair services in Highlands Ranch.

Calling in the Experts

We have already indicated certain reasons why you would need to contact a service professional to attend to some of your service needs. Here are a few more.

Problems with hinges, cables or springs: Since these things can become very dangerous to anyone working with them, including trained professionals, the only thing we would suggest that you do on your own is grease these parts and see if it fixes the problem. If you still have the same problem, call in the experts.

Please be aware that there are plenty of DIY instructions on YouTube and other places on the Internet that will tell you how to repair garage door springs. This is a good indication that this is a pretty common problem with garage doors. However, I would never suggest that you attempt to replace or repair garage door springs on your own. They have high-tension and can be deadly if not handled properly. Even in addition to harming yourself, you could harm anyone else who is in the garage at the time of your attempting to make the needed adjustments to your garage door springs.

Bottom Line

The bottom line is that you should be observant before contacting a garage door service. There are some things that do not require the help of a professional. If you find that all you needed to do was replace the batteries in your wall remote to get your garage door working again and you have called on a professional garage door service, you might be pretty upset and frustrated. Take the time to inspect your garage on your own before calling in the experts.

Aricle source here: What to Do Before Contacting a Garage Door Repair Service