Garage door openers are great, until they fail to work correctly. Suddenly, you find yourself frustrated because the unit that you spent money on isn’t doing the job it was made for. HR Garage Door Repair provides garage door services in Highlands Ranch, CO and understands very well that when you spend money on a system, the expectation is that it will work. What many people don’t realize is that their garage door opener problem is actually (often times) not merely as complex as it might seem – the information provided is meant to help people like you troubleshoot issues with opener systems. Of course, if in doubt, be sure to call a professional provider. You wouldn’t want to make a mistake that would cause your garage door to come falling down.
It is important to note that many issues might appear to point to the opener, when the opener is actually working perfectly fine. It is important to determine what the culprit of your concerns are. The information provided should help you out in this area.
First Things First
If you think your opener is malfunctioning, stop and take a look at the garage door before you do anything else. This will help to determine if the issue is the opener or something else. You can take a moment to disconnect your opener and then attempt to open the garage door by hand. If it doesn’t lift open easily, then the issue isn’t actually your opener – it is actually more likely to be a problem with the tracks, rollers or springs. Now, if on the other hand the garage door does open and close smoothly, you are more likely to have an issue with the opener. But this is certainly a first step to take, because you could potentially eliminate the opener system as the problem.
Are you dealing with any of the concerns listed below? If so, take a look at the details provided.
The garage door only closes when using the wall switch.
This points to a problem with the sensors. You should notice lights on your sensors. When they are blinking, this indicates an issue. Make sure nothing is in their path, and make sure that there is in fact light coming from them (albeit not blinking). If something is in their path, or if they are misaligned, it can cause a problem with the operation of the garage door.
The garage door reverses when you are trying to close it.
When this happens, there is either an issue with the settings or an obstruction in the tracks. On the other hand, sometimes it is an issue with the safety sensors. More often than not, it isn’t actually the garage door opener itself that is causing the problem, although many people automatically assume it’s the opener. Check to see that the limits were programmed properly. This might solve everything for you.
The remote control won’t work.
If you have already checked to make sure that the remote control doesn’t have a dead battery, then you have probably moved along to trying to troubleshoot the garage door opener. If the garage door doesn’t work with the remote, but works with the wall switch, then it is probably an issue with the opener system, be it the remote or something else. Try swapping out the remote’s batteries. If this doesn’t solve the issue, then it could be an electrical short. Talk to an expert if you have any questions, but the easiest solution might be to change the remote.
The garage door is operating on its own.
This can actually be somewhat frightening. But, it is unlikely that the problem is a ghost playing around with your garage door. Sometimes, the issue isn’t actually the garage door opener at all, but someone else’s remote being set to the same frequency yours is set to. The solution? Reprogram the opener codes for your garage door. If this doesn’t fix the issue, then you might want to check the wall unit. This is something you might need an expert to help with.
Garage door doesn’t always work.
When the garage door seems to choose when it wants to operate, it can be quite frustrating. But again, the issue might not actually be the opener, even though it would appear that this is the case. The problem might point to radio interference. If you bring your remote control very close to the unit and it works fine, then you probably have a radio interference problem when at a distance!
The opener motor is making strange noises.
When your garage door opener starts to make unusual noises, it could be because of an issue with the motor. Unless you know what you are doing and have experience, it is a wise idea to either get in touch with the manufacturer of your garage door opener (whether that happens to be LiftMaster, Chamberlain, Genie, Sears or another name) or to get in touch with a local garage door repair expert.
Other problems with garage door openers include loose chains, loose belts and power source issues.
There are numerous problems that can arise when you are using a garage door opener. Luckily, many of them can very easily be resolved, and some of them aren’t actually the fault of the opener system itself. A garage door repair expert will be able to find the best solution for you, if you are in doubt. Be sure to search for a company that you can count on in your city – see to it that they have excellent reviews, and a good reputation within the community. Remember, the problem often times appears to be the garage door opener system, but it is actually something else. Make sure that you are troubleshooting the issue and not just assuming that the problem is the opener unit – sometimes, this just isn’t the case. Hopefully this information has provided you with the guidance that you are looking for!
Aricle source here: Troubleshoot Garage Door Openers
